24
station for Ethernet network device to have
wireless capability, you have to associate it with a
working access point. Click ‘Select Site Survey’
button, then a “Wireless Site Survey Table” will
pop up. It will list all available access points near
by. You can select one access point in the table and
it will join wireless LAN through this access point.
Please go to Section 2-4-2-1 for more information
about the ‘Wireless Site Survey Table’.
WLAN MAC
For some applications, you may need to designate
a specific MAC address for the access point.
Please enter the MAC address here. If you are
connecting the access point to a computer, you can
simply press ‘Clone Mac address’ button to fill the
MAC address field with the MAC address of your
computer.
Auto MAC Clone
If this function is enabled, the access point will
automatically clone the MAC address of the
wireless clients which is the first one to associate
to the access point while the access point is
powered on.
After you finish with setting, please click ‘Apply’, and the following
message will be displayed:
When you see this message, the settings you made are successfully saved.
You can click ‘Continue’ button to back to previous page and continue on
other setting items, or click ‘Apply’ button to restart the wireless access
point and the changes will take effect after about 30 seconds.
