Hawking HNC720G, Быстрое руководство по установке

Страница: 17 / 24

For Wireless Configuration :
To configure your network camera for wireless use, please either click on
“Link to Selected Device” in the IP Setup window (see previous page),
or type the network camera’s IP address in your web browser’s
“Address” bar. (The network camera’s IP address can also be found in
the IP Setup window under the heading “Current IP Address.)
Once you are on the network camera’s homepage, click on
“Configuration”. Then, click on “Network” in the column menu on the
left-hand side of the page. When the “Network” page appears on the
right-hand side of the page, you can scroll down the page to find the
fields that will allow you to configure your network camera’s wireless
settings under the heading “WLAN Configuration”.
The
SSID , ( Wireless) Channel , and Encryption information must
correspond with your existing wireless network settings. The Wireless
Mode will depend on how the camera is connected to the network. If
you are using a router or access point, select Infrastructure . For peer-
to-peer connection, select Ad-Hoc .
Please be sure to click on
Save at the bottom of the page to save the new
settings.
Important Note : After configuring and saving your wireless network
settings, you will need to perform a “soft reset” on the network camera.
You can do this by first removing the Ethernet cable, and then
17