Hawking HNC720G, Быстрое руководство по установке

Страница: 14 / 24

3
After completing the search, the main IP Setup window will appear. The IP
Setup program should have returned an IP address for your network camera
(under the “Current IP Address” heading) that is consistent with your existing
LAN settings (as long as you have a DHCP server on your network; most
networks do).
(A DHCP server provides IP addresses to client devices on the same network.)
Click on the “Series Number” (same as MAC Address) of the desired camera.
(If the IP Setup window does not display any devices, you will need to find a
tool small enough to be inserted into the reset hole on the left side [if facing the
front of the camera] of the base of the camera. Hold the button for two full
cycles. [The two LEDs will flash continuously and stop twice. When the red
LED begins to flash after the second stop, release the button.] )
If the IP Address returned by the IP Setup program is not consistent with your
LAN settings or you want to change the IP address manually, you can go to the
bottom half of the window, and assign an IP address in the IP address bar.
Click on the checkbox if you want to use the same IP address whenever the
system boots. Then click “Set IP Address”. (It is recommended that you click
the checkbox.)
If you are unfamiliar with how to manually set an IP address, a detailed example
is provided after Step 4 below.
14