10
3.2.4 Server Names and Server Name Rules
The default server name of the Server is “
HMPS2U
”. If you put two or more Servers in
your local area network, to avoid using the same server names you have to change the
server names by using the setup software or the server’s web pages. If your server name
is longer than 15 characters, the server uses only the first 15 characters.
3.2.5 Setting the IP Address Using DHCP
Follow the instructions below to get an IP address using DHCP:
1.
Edit or create a scope in the DHCP manager of the DHCP daemon. The entries
included in this scope should contain the following parameters:
range of IP addresses
subnet mask
default router IP address
DNS server IP address
lease duration
2.
Activate the scope. The Server automatically gets the DHCP parameters. If you are
using DNS, you may include at least one DNS server IP address in the DHCP scope
or manually set the DNS server IP address using Server’s web pages or the
HMPS2U’s setup software.
3.2.6 Setting the IP Address Using the HMPS2U Software
1.
Install the Setup Software. The Setup Software is available on the Product CD.
2.
Start the Hawking Print Server software window will appear.
On Windows, it will appear until Start, Programs, Hawking, Control Center
On Mac, it will appear in your dock
3.
If the tool finds multiple Servers in your local area network, you will have to select
one Server from the Server List.
