Hawkeye Mfg H8932, Руководство по установке

Страница: 7 / 11

-6- -7-
SETUP
Setup Mode Sub Menus
1. SETUP COMMUNICATIONS
Select SETUP COMMUNICATIONS to adjust communications parameters.
2. SETUP OPERATION
Select SETUP OPERATION to adjust operational parameters.
Communications Parameters
Modbus Address (1-247)
Upstream Type (RS-485, RS-232, Infrared)
Upstream Duplex (2-Wire, 4-Wire)***
Upstream Baud (2400, 4800, 9600, 19200)**
Upstream Parity (NONE, ODD, EVEN)**
Downstream Duplex (2-Wire, 4-Wire)
Downstream Baud (2400, 4800, 9600, 19200)
Downstream Parity (NONE, ODD, EVEN)
***Parameter not available for RS-232
** Parameter not available for Infrared
Operation Parameters
Backlight Brightness (0-9, 0=Backlight OFF)
Auxiliary Input (ALARM = OPEN, ALARM = CLOSED)
Automatically Rotate Parameters (YES, NO)
3. FIND METERS
Selecting FIND METERS initiates a search and identifies devices on the
network. Exit the search by pressing any key (do not exit until all active
addresses have been counted).
Unsupported devices will be designated as “unknown device” and parameters
will not be displayed. (See supported devices page 11)
4. REVIEW METERS
Select REVIEW METERS to review all devices on the network.
Status LED and Relay Operation
The Status LED displays the condition of the alarm registers on a color cue
basis.
Green = Normal Operation. No network devices are in warning or alarm
mode.
Yellow = Warning. One or more network devices are in warning mode.
Red = Alarm. One or more network devices are in alarm mode or the
auxiliary input is active.
Set Up Communication Button Functions:
Set Up Operation Button Functions:
Increment
parameter Decrement
parameter Return to
setup menu Go to next
parameter
SETUP COMMUNICATIONS
DOWN UP SELECT METER
Increment
parameter Decrement
parameter Return to
setup menu Go to next
parameter
SETUP OPERATION
DOWN UP SELECT METER