Hawk Ghost HD16, Инструкция по эксплуатации, Страница: 6 / 20

NEVER INSTALL DIFFERENT TYPES OF BATTERIES IN THIS PRODUCT AT SAME TIME.
DO NOT STORE BATTERIES IN CAMERA WHEN NOT ACTIVELY USING CAMERA
Do not mix old and new batteries and do not mix battery types.
DO NOT Mix Lithium and Alkaline Batteries
Install according to correct polarization (+/-)
Failure to follow any of these above warnings may result in damage to product,
leaking/exploding batteries, fire or personal injury.
BATTERY AND MICRO SD CARD INSTALLATION
BATTERY REQUIREMENTS AND INSTALLATION (BATTERIES NOT INCLUDED):
•
HAWK® recommends using 4 new Lithium AA ( Energizer® brand) batteries to obtain maximum battery life or
4 new alkaline AA batteries. NiMH Rechargeable batteries are not recommended, as they produce lower
voltage that can cause operational issues.
1. Unlock Battery
Tray - Turn Latch
Horizontal
2. Pullout
Battery Tray
3. Insert 4 new AA
Batteries
(not included)
into tray according to
correct polarization
(+/-) and close battery
Tray.
4. Lock Battery
Tray – Turn Latch
Vertical
MICRO SD CARD REQUIREMENTS AND INSTALLATION:
(MICRO SD CARD NOT INCLUDED)
•
HAWK® recommends using a new, blank SandDisk® Class 4 or faster Micro SD Card.
*Older/Slower Micro DS cards can slow down camera performance and affect picture quality.
•
Micro SD Card Maximum Capacity:
•
Ghost™ HD16 Game Camera – 32GB Micro SD
•
Ghost™ HD16 Black Game Camera – 32GB Micro SD
•
Ghost™ HD20 Game Camera – 128GB Micro SD
1. Open Controls Compartment Door. With
Camera in ‘OFF’ Position Insert Micro SD Card
into Micro SD Slot. A “click” sound indicates
card it installed correctly.
2. Close Controls
Compartment Door.
Micro SD
(not included)
03-2018 – 00 Page 5
QUESTIONS? Call 810-626-3026 or Visit www.hawkhunting.com