manualshive.com logo in svg

Hawk 308N, Руководство пользователя

Поделиться
Скачать
Hawk 308N Скачать руководство пользователя страница 27

1.27

1.27

308055LC071195B

PREPARING THE MOWER FOR STORAGE

PREPARING THE MOWER FOR STORAGE

Handlebar storage: To lower the handlebar unscrew the 2 secur-
ing knobs sufficiently to allow it to be pivoted forwards to rest
against the mower. Take care to ensure that the control cables do
not become snagged at the pivot point and depress the engine stop
lever to prevent it being damaged through contact with the
engine. 

Storage for long periods: To ensure your mower is maintained
in good working order it is important that the following procedure
is adopted when the mower is stored for periods in excess of one
month. Refer to the maintenance section and engine handbook as
necessary.

Drain  fuel from the engine by operating the engine until it stops.

Disconnect the spark plug lead. Change the engine oil.

Remove the engine spark plug and pour 15ml of engine oil into
the engine cylinder and replace the spark plug. Do not exceed the
stated volume of oil as engine damage may occur on re-starting.
Operate the engine brake lever and slowly pull the engine start -
grip once  to crank the engine. This will distribute the oil and help
prevent engine corrosion.

Clean all areas of the mower and ensure that the grassbag is clean.

Lubricate the mower.

Treat metal parts with a water repellent anti-corrosion product.

Lower the handlebar, if desired.

Rest the mower deck on wooden blocks to remove the weight of
the mower from its wheels / roller.

Cover the mower with a protective sheet and store it in a dry,
ventilated area.

CS096

Содержание 308N





































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды