manualshive.com logo in svg

Hawk 308N, Руководство пользователя

Поделиться
Скачать
Hawk 308N Скачать руководство пользователя страница 25

1.25

1.25

308055LC071195B

MAINTENANCE

CUTTERBAR   

WARNING: PREVENT ACCIDENTS -Never work on the cutterbar unless the spark
plug lead has been removed. The cutterbar has sharp edges. ALWAYS wear strong
gloves to protect your hands when working on the cutterbar. DO NOT operate tools
towards the cutting edges to avoid the risk of injury should the tool slip. ALWAYS use
genuine Hayter replacement parts.

The condition of the cutterbar and its mounting arrangement should be checked regu-
larly for signs of wear or damage. Ensure that the cutterbar is not bent or cracked.

A damaged cutterbar that is out of balance will vibrate excessively and may break. DO
NOT use an unbalanced cutterbar.

Regularly check that the bolt securing the cutterbar is tightened to the specified torque
of 54Nm ( 40 lbs. ft. ).

Replace the cutterbar every 2 years or sooner if excessively worn or damaged.

How to remove the cutterbar: Drain the fuel by operating the
engine until the fuel tank is empty and the engine stops. Remove
the spark plug lead and allow the engine to cool. Turn the
mower on its right hand side and ensure that the exhaust side of
the engine is uppermost.

Firmly grip the end of the cutterbar with the gloved hand and
remove the bolt, spring washer and distance piece securing the
cutterbar with a 9/16" A/F spanner.

How to assemble the cutterbar: Assemble the cutterbar with the
turned up edges facing towards the engine. Secure the cutterbar
using the original bolt, spring washer and distance piece and
tighten to a torque of 54Nm ( 40 lbs.ft. ).

1

2

CS081

1. Exhaust
2. Air cleaner

CS094

Содержание 308N





































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды