4.3 Checking the delivery
Unpacking
1. Take out the product.
2. Check that the product is complete and check for transport damage.
Note any transport damage on the transport documents or on the carrier's delivery note.
Take photos of any transport damage and show them to the manufacturer.
3. Dispose of the product packaging correctly in accordance with local regulations.
DAMAGE
Claim immediately for all defects at:
HAWE Mattro GmbH
Pocherweg 24
6130 Schwaz
Tel.: +43 5242 20904-0
Claims for damage can be accepted only if submitted within the applicable claim periods. HAWE cannot
accept liability for later claims.
4.4 Storage
DAMAGE
Property damage from incorrect storage
Incorrect storage can lead to damage. Refer to the technical data.
Store the product and its individual components as follows:
■
Do not store outdoors.
■
Store in an area that is dry and free of dust.
■
Protect against sunlight (UV radiation). (dark)
■
Storage temperature 0 to 20°C.
■
Humidity (atmospheric humidity 50% or less)
■
Protected against splashed water and dripping water.
■
Do not store near sources of ignition or heat, aggressive media (e.g. acids, fuels or lubricants) or
ozone-producing sources of light (e.g. fluorescent light sources, mercury-vapour lamps).
■
Do not place in the immediate vicinity of sources of heat (such as radiators)
■
Place only in areas equipped with re alarms.
■
Maintain the required safety clearance from ammable materials (at least 2.5 m).
■
Ensure the storage area is acceptable to the re brigade ofcer and the insurance company.
■
Mark the storage area with appropriate notices.
■
Prevent excessive cell voltage (during storage, the SOC of the battery must lie between 35 and 55%.)
■
Avoid deep discharge. (Check the voltage and SOC of the battery 1x per month, more often if subject
to rapid discharging.)
HAWE Hydraulik SE
B 6130 - 02-2022 - 1.0en
17/39
