4
Contents
1.
Intended Use
2.
General Notes
3.
Instructions for Mounting and Use
4.
Instructions for Inspection, Maintenance and Repair
5.
Technical Data
6.
Mounting
7.
Warranty
8.
Service
Please pay special attention to the parts of these instructions which are underlined,
printed in bold
or provided with warning signs!
1. Intended Use
Universal door opening limiters are designed for mounting in right or left mounted doors. They are used for limiting the door opening angle.
See “Instructions for Mounting and Use”.
2. General Notes
These instructions are an integral part of the product.
They are meant for skilled persons in industry and trade to mount door opening limiters in compliance with the applicable standards.
Please keep them in a safe place for future reference. The same applies to assembly and operating instructions for accessories.
We do not accept liability for any damage caused to or by users or third parties resulting from
non-observance of these instructions and / or abnormal use.
The instructions are constantly reviewed and updated if necessary (subject to technical changes) –
see
https://www.haewa.com//dialogue-contact/download-centre.html
You will find the product descriptions on our website under the respective order number.
Note:
Information included in the print media you have may not be up to date any more. In case of doubt, the information given on our website shall apply.
Delivery includes:
•
1 perforated guide bracket
•
1 clamp
•
1 cone nut
•
1 hexagon nut M6, DIN 985
•
2 pan head screws with cross recess head M5x10, DIN 7985-A
•
2 self-tapping screws with countersunk and cross recess head M5x12, DIN 7500-M
•
2 countersunk screws with Torx M6x16, similar to DIN 965
•
1 washer 6.4, DIN 9021
•
1 bracket
•
4 nuts M5, DIN 6923
All details given apply to a door opening limiter without further machining.
3. Instructions for Mounting and Use
Please observe the procedure described under item 6 “Mounting”.
Enclosure must be installed in a horizontal position to ensure a safe mounting.
Use tools from 3 to 6 Nm to adhere to the specified torques.
Before closing the door, lift the guide rail.
Caution:
Please make sure that no dynamic loads affect the door opening limiter.
Ensure a secure manual engagement. This applies in particular to 500 mm wide or larger doors or to doors fitted with external or internal components e.g.:
electrical devices.
Mounting Instructions – Universal Door Opening Limiter 3080-7108-87-00
