Havso Erika 2.0, Руководство пользователя

Страница: 15 / 20

English
15
OPERATION
Before first use
– For a perfect taste, carry out 2 or 3 boil-processes with fresh water (without
coffee). Once all the water has passed through, switch off the appliance and let
it cool down for 5 minutes. Then repeat the process with fresh water.
Using your coffee maker
1. Open the top lid and fill the water tank with drinking water. The water level
should not exceed MAX level marked inside the tank.
2. Place the funnel into the funnel support and make sure the funnel is assembled
correctly. Then insert the filter correctly.
3. Add coffee powder into the filter. Usually a cup of coffee need a level spoon of
coffee powder, but you may adjust according to personal taste. Then close the
top lid.
4. Place the carafe on the heating plate.
5. Plug the power cord into the outlet. The LCD will display “12:00”
and the colon will flash.
6. Press ON/OFF button, the RUN indicator will be illuminated red.
The appliance will begin working.
7. The brewing process can be interrupted by pressing the ON/OFF button twice
at any time during operation, and the brew indicator will be extinguished. And
the RUN letter on the LCD will disappear.
Note: You can take out the carafe, pour and serve at any time. The appliance
will stop dripping automatically. But the time cannot exceed 30 seconds.
8. If you want to serve coffee immediately, you shall remove the carafe to serve
when the coffee maker has finished brewing.
Note:
The coffee you get is less than the water you have added, as some
water is absorbed by coffee ground.
9. If you do not want to serve immediately, do not unplug the power and keep the
switch on. The coffee can be kept warm in the heating plate. For an optimum
coffee taste, serve it just after brewing.
10. Always turn the coffee maker off and unplug the power cord from the electrical
outlet when the coffee maker is not in use.