The right angle power cable dictates
that the cable route to the right.
Routing as shown in FIG. K will provide
the cleanest install.
Strain relieve power cable at
the VGA cable cleat, as shown.
Bundle cables and tie together
in neat bundles, as shown.
Size of each bundle must be
small enough to pass thru exit
in cable cover installed in FIG. L.
Step 5: Installing and Strain Relieving USB Cables
Plug I/0 cables into their respective
ports, and strain relieve each cable to
the integrally molded cleat above each
connector using the supplied cable ties.
Step 6: Bundling and Routing the Cables
Step 7: Connecting the Antennas
Tie-off/strain relieve bundles to strain
relief cleats, previously installed to
mounting brackets, as shown.
Screw in RF antennae
(if so equipped), as shown.
FIG. I
FIG. J
FIG. K
FIG. L
FIG. M
FIG. N
www.havis.com • 1-800-524-9900
5
6
NOTE: If installing the Cradle Only Dock (Part # DS-PAN-302), skip ahead to Step 10 on page 9
