C-MAP_INST_6-09
Caution: The Gooseneck Map Light uses a halogen bulb—It can be VERY HOT!
Do not touch the bulb or fixture shroud when it is hot.
3.
Operation:
•
Power is supplied through a dimmer switch. Turn the knob clockwise to turn on the
light and increase brightness, and counterclockwise to dim or turn off power.
Caution: Always turn the dimmer knob gently. Do not force the knob to turn once it stops.
•
The fixture head has an integral red lens. If desired, slide the lens over the lamp for
red light, or slide it toward the stem for white light.
Note: To avoid leaving fingerprints on the lens, use only the tab on the edge of the red lens to
slide it.
4.
Troubleshooting:
•
In the event of improper operation, first check that the dimmer switch is turned all the
way on by gently rotating the knob clockwise until it stops.
•
Second, check the bulb and replace it if it is burned out.
•
Third, check the fuse (if installed) and replace it if necessary.
•
Finally, use a voltmeter to ensure that the fixture is receiving adequate power. The
light requires nominally 12 VDC for correct operation. Correct any faults found.
REPLACEMENT PARTS:
Part # Description
CM93745
Lamp, 5 Watt, Halogen
TEMPLATE:
Bulb
Dimmer
+12 VDC
Power
1A Fuse
(Recommended)
User-Supplied
Connector
(Optional)
Ground
HOT - RED
COMMON - BLACK
Note:
Fuse, fuse holder, and connector are
not supplied by Havis-Shields.
WIRING DIAGRAM:
∅
0.16 (5/32” Drill)
Mounting Holes
∅
0.50 (1/2” Drill)
Wireway
1-23/32
21/32
Clip Here
Clip Here
