KK-K9-C14-K-32_INST_12-08
3
3.
INSTALL MOUNTING LEGS:
•
Using ¼-20 x ¾” Carriage bolts attach mounting legs to hold down plates.
•
Loosely attach hold down plates to floor using existing seat mounting studs and nuts used
to hold down seats.
Note: Use one OEM nut as a spacer under the plate.
4.
SLIDE IN K9 MAIN HOUSING:
•
Slide in main housing
•
Mark & drill 5/16” holes in K9 unit floor where mounting legs and floor come together.
•
Mount legs to housing loosely using ¼-20 x ¾” Carriage bolts and serrated nuts.
5.
INSTALL TUNNELS AND FILLERS:
•
Loosely attach side tunnels to main housing using ¼-20 x ¾” or ½”Carriage bolts (double
or triple skin) and ¼-20 serrated nuts.
•
Place cover step in tunnels and mount using #12 x ¾” Stainless Sheet Metal screws.
Rear housing extension should
be attached at this time
