KK-XXX-03_INST_10-07
14
Position
Driver-side Ceiling
section to
mate with
Bench/Wall
assembly. Pre-
drill 5/32” holes into
Ceiling,
using
Bench/Wall
assembly holes as a guide.
Item #7
to
#1
3” inches
Top Passenger-Side rear
Approximately 3”inches
Top Driver-Side rear
Item #6
With unit positioned according to measurements on previous page, pre-
drill and attach a #10 x 1” sheet metal screw to hold the rear
Bulkhead
in
place while assembling the remainder of the unit.
Item #6
Item #6
