1
S-DMM-XXX-CV-SO_INST_3-08a
INSTALL INSTRUCTIONS S-DMM-XXX-CV-SO
1996-2008 CROWN VICTORIA
SWING-OUT DASH MONITOR MOUNT
• Ratchet Wrenches
• Sockets - 7mm, 7/16”, 9/16”
• Open End Wrenches - 7/16”, 9/16”
• Phillips Screwdriver
• T-20 Torx Driver
• AM/FM (DIN) Removal Tool
TOOLS REQUIRED:
QTY: DESCRIPTION:
PART
#:
1
3/8”-16 x 1 Hex Bolt
GSM33028B
2
3/8”
Flat
Washer
GSM31007B
1
3/8”
Nylock
Nut
GSM30018B
4
1/4-20 Hex Flange Serrated Nut
GSM30023
1
3/8” Self Adhesive Loom Clip
GSM20032
1
6”
Wire
Tie
GSM20034
1
Monitor Adapter Hardware
Varies (monitor specifi c)
HARDWARE:
Always!
• Read all instructions before installing any Havis-Shields Equipment Corp products.
• Check for obstructions (Wire, brake lines, fuel tank, etc.) before drilling any holes!
• Use hardware provided with install kit
• For product support: visit the Install Instructions Section of our website at
http://havis.com/Installation/Installation.html, email [email protected]
or call 1-800-524-9900.
LINE DRAWING:
**Does not work on 2008 Police Package Crown Vic with optional CD player**
This instruction
shows installation of a
Data-911 computer
