Haverland RCES LCD, Инструкция по эксплуатации и монтажу

Страница: 56 / 170

EN
56 RCES_LCD
3.4.4 MANUAL MODE
If you do not want to set your radiator, we recommend you choose the MANUAL mode, where you can
select the required temperature between 12 and 30 ºC.
We recommend choosing a temperature between 20 - 21 ºC.
Step 1: Successively press the button until appears on the screen.
Step 2: Press the button to confirm. The pre-set temperature is displayed in manual mode.
Paso 3: Press the or buttons to set the target temperature. Press the button to
confirm.
• We recommend selecting a temperature between 20 and 21 ºC.
• Press the button if you want to know the room temperature.
During the selection of the requested temperature, a pilot light above the display
will change colour according to the selected setpoint temperature.
• Red if the chosen temperature is equal to or greater than 24 ºC.
• Orange if the chosen temperature is between 19.5 and 23.5 ºC.
• Green if it is less than 19.5ºC.
The setting can be
made between a
minimum of 12 ºC and
a maximum of 30 ºC.
This symbol means that the radiator is heating up; the room
temperature is lower than the selected temperature. As soon as the
setpoint temperature is reached, the symbol will disappear from the
display.
3. OPERATION