16
EVENTUAL BOLSTER
Minimum 15 cm
Minimum 15 cm
Minimum 15 cm
Minimum 15 cm
WALL OR
THE NEAREST
OBJECT
WALL OR
THE NEAREST
OBJECT
FLOOR
MODEL
A (mm)
B (mm)
C (mm)
RC 4 A
420
246
159
RC 6 A
420
246
319
RC 8 A
420
246
478
RC 10 A
420
246
638
RC 12 A
420
246
638
INSTRUCTIONS FOR THE INSTALLATION
It is important that the transmitter IS FIXED FIRMLY TO A SOLID AND LEVELLED WALL. Please
make sure that transmitter remains COMPLETELY VERTICAL with respect to the floor. It is important
that you follow these instructions very carefully.
-
Open the packaging box and make sure that the transmitter is in perfect condition. MAKE SURE
THAT THERE IS A SOCKET NEAR THE AREA WHERE YOU ARE GOING TO PLACE IT.
-
Take out from the box the PATTERN TO SEE THE EXACT POSITION OF THE BORES
NECESSARY TO PUT THE TRANSMITTER ON THE WALL.
-
To avoid problems and to obtain maximum heating results it is necessary to keep a minimum
distance of 15 cm between the transmitter and any combustible material such as curtains,
furnitures, etc. The rest of the distances to be respected are described in the following figure
(Fig.3).
-
Apart from taking out the template explaining the fixing on the wall, take out the two wall
supports and the bag with the accessories
.
-
The measurements of the wall bores are (Fig.4):
FIG. Nº. 3
FIG. Nº. 4
