Check the following before contacting technical support.
Troubleshooting
PROBLEM
POSSIBLE CAUSE
SOLUTION
The device does not
work.
Water extraction
capacity is too low.
The device works, but
reduces the relative
ly.
blowing out warm air.
The display is not
showing the humidity
set point.
noisy.
The dry air is passed over
heating coils before it is blown
into the room as part of the
dehumidifying process.
Set humidity is higher than the
ambient humidity.
There is too much ventilation.
The room is too big.
The tank has not been installed
correctly.
The power is not connected.
Ambient temperature or
humidity is too low.
Runtime is too short.
The water tank is full.
The display shows the room
relative humidity not the set
point.
There is residual water in tank,
and the appliance has been
moved abruptly.
device is on an uneven surface.
Set the humidity lower than ambient humidity.
Reduce ventilation (e.g. close windows and shut
doors).
capacity.
Replace the tank.
Insert the plug into the wall socket.
It is normal that the device does not dehumidify in
these conditions.
Be patient and wait.
Empty the tank.
Press the up or down button once to see the selected
relative humidity.
Be careful when moving the tank.
14
Содержание DES19
