Hausted EPC, Руководство по эксплуатации

Страница: 20 / 30

APC-IN-INS-LAB-RevA14 20
3.9.5 Using Restraint Straps
Locate both ends of the restraint strap, on either
side of the chair. One will have a square loop on
the end, and the other will have hook and loop
fasteners (Figure 3-32). Slide the end of the strap
with the hook and loop fasteners through the
loop on the other strap (Figure 3-33). Pull out
on the strap until the patient is secure. Fold the
hook and loop fastener end of the strap back
until it makes contact with the mating hook and
loop fastener on the strap (Figure 3-34).
3.9.6 Installing the Patient Tray
Using the push buttons underneath the tray, lock
the legs 90° to the tray prior to installing (Figure
3-35). Check to make sure that the legs are
located in the same hole (Figure 3-36). Insert the
first leg into preferred socket on one side of the
patient, and insert second leg into corresponding
socket on other side (Figure 3-47). Adjust as
necessary to best fit patient.
FIGURE 3-32
FIGURE 3-33
FIGURE 3-34
FIGURE 3-35
FIGURE 3-36
FIGURE 3-37