Hausted EPC, Руководство по эксплуатации

Страница: 18 / 30

APC-IN-INS-LAB-RevA14 18
3.8 ESCEYE / ESDEYE HEADREST
3.8.1 Pre-op / Post-op Head Extension
To remove the head extension, rotate the
knobs on the two ends of the extension
counterclockwise (Figure 3-19). With knobs
loose, pull out on the extension. To install the
extension, slide the extension over the surgical
mounting bars using the guides on the extension.
Slide the extension fully down the surgical side
bars, then tighten the knobs on the end of the
extension.
s
NOTICE: Ensure the head extension is
secure before applying any pressure.
3.8.2 Adjusting the Headrest
Remove head extension (see Pre-op / Post-op
Head extension, Section 3.8.1). Grasp the right
ball style knob (Figure 3-20), and rotate the knob
counterclockwise to articulate the head section
upward (Figure 3-21). Rotate the knob clockwise
to articulate the head section downward (Figure
3-22). Once the upward articulation has been set,
grasp the left ball style knob (Figure 3-23), and
rotate the knob counterclockwise to adjust the
height of the headrest (Figure 3-24).
Info: After understanding which knob creates
which action, quick and smooth adjustment
can be achieved by rotating the knobs
simultaneously (Figure 3-25).
FIGURE 3-19
FIGURE 3-20
FIGURE 3-21
FIGURE 3-22
FIGURE 3-23
FIGURE 3-24
FIGURE 3-25
FIGURE 3-26
FIGURE 3-27