2-1
068032
unCrating inStruCtiOnS
2
l
iMpOrtant - repOrt any
SHipping DaMage iMMeDiately:
inform shipper of any damages - leave carton
intact. leave the equipment in the receiving
area until inspection is complete.
l
CautiOn - pOSSiBle eQuipMent
DaMage
:
this crate contains fragile expensive medical
equipment. uncrate and handle carefully.
if after uncrating the equipment you find any
damage (no matter how slight), show it to
your supervisor.
l
warning - perSOnal
inJury HaZarD:
when cutting bands, always use tool specifically
designed for that purpose. this will help avoid
personal injuries frequently incurred when
bands are cut and tension is released.
iMpOrtant:
Follow each step in the order shown
in these instructions.
unpaCKing inStruCtiOnS:
your Hausted equipment has been carefully packed
at our manufacturing plant to ensure safe shipment
to your medical facility. there are several procedures
you must follow to put your new equipment in service.
these procedures only take a few minutes to complete
and are required to ensure proper operation of the
equipment.
1. Cut the two bands around the shipping carton.
2. remove the top half of the carton and cut one side
of the bottom half.
3. remove the equipment from the carton.
4. Check to see if all features of the equipment work
properly. if all the features work, advance to step 5.
if any of the features of the equipment do not work
properly, call Hausted for service at: 877.706.5151.
5. Clean the equipment using mild detergent to remove
any dirt accumulated during shipment, and place the
equipment into service.
