ENGLIS
H
saFetY instruCtiOns
warninG!
Read all safety warnings and all instructions. Failure to
follow the warnings and instructions may result in electric shock, fire
and/or serious injury.
1. work area safety
a) Keep work area clean and well lit.
Cluttered or dark areas invite
accidents.
b) do not operate power tools in explosive atmospheres, such
as in the presence of flammable liquids, gases or dust.
Power
tools create sparks which may ignite the dust or fumes.
c) Keep children and bystanders away while operating a power
tool.
Distractions can cause you to lose control.
2. electrical safety
a) double insulated tools are equipped with a polarized plug (one
blade is wider than the other.) this plug will fit in a polarized
outlet only one way. if the plug does not fit fully in the outlet,
reverse the plug. if it still does not fit, contact a qualified
electrician to install a polarized outlet. do not change the plug
in any way.
Double insulation eliminates the need for the three-
wired grounded power cord and grounded power supply system.
b) do not expose power tools to rain or wet conditions.
Water
entering a power tool will increase the risk of electric shock.
c) Handle the cord carefully. never use the cord for carrying,
pulling or unplugging the power tool.
Keep cord away from
heat, oil, sharp edges and moving parts.Damaged or entangled
cords increase the risk of electric shock.
d) if operating a power tool in a damp location is unavoidable,
use a Ground Fault Circuit interuptor (GFCi) protected supply.
Use of a GFCI device reduces the risk of electric shock.
e) when operating a power tool outside, use an outdoor
extension cord marked “w-a”or “w”.
These cords are rated for
outdoor use and reduce the risk of electric shock.
f) do not use the equipment close to flammable objects.
3. Personal safety
a) stay alert, watch what you are doing and use common sense
when operating a power tool.
Do not use a power tool while you
are tired or under the influence of drugs, alcohol or medication. A
moment of inattention while operating power tools may result in
serious personal injury.
b) use personal protective equipment. always wear eye
protection.
Protective equipment such as dust mask, non-skid
safety shoes, hard hat, or hearing protection used for appropriate
conditions will reduce the risk of personal injuries.
c) Prevent unintentional starting.
Ensure the switch is in the off-
3
Содержание 59595070
Страница 2: ...ENGLISH 4 8 7 6 5 3 2 1 12 14 13 11 10 9 1 ...
Страница 17: ...ENGLISH FRANÇAIS SCHEMATIC DRAWING SCHÉMA 16 ...