Haussmann 59595064, Руководство оператора

Страница: 9 / 27

ENGLIS
H
tecHnical sPeciFicatiOns
Product Code 59595064
Model number M1Q-DU12-80
Voltage rating 120V AC / 60Hz
Current rating 6.5 AMP
No-load speed 0-3000 SPM
Stroke length 23/32″ (1.8 MM)
Max. cutting capacity Steel 5/16″ (8 MM)
Wood 3 3/32″ (80 MM)
Bevel range 0º - 45º
assemBlY
warning! Always ensure that the tool is switched off and the plug
is removed from the power source before making any adjustments or
performing maintenance procedures.
1. attacH Blade (Figure 2 & 3)
The depth of cut should be set according to the thickness of the
workpiece.
• Disconnect plug from power source and remove the footplate sleeve
• Loosen the depth adjustment knob located between the guard and the
jigsaw handle.
• Insert the saw blade (teeth in cutting direction) until it latches in the
plunger. When inserting the saw blade, the back of the blade must rest
in the groove of the guide roller.
• To remove blade, lift tool-less blade change cover up with index finger
and thumb and remove blade.
• Use with T shank jigsaw blades only.
OPeratiOn
warning! Always use the correct voltage: The voltage of the power
source must match with the values on the nameplate of the power tool.
1. switcH
• To switch the jigsaw on, squeeze the switch trigger (1).
• For continuous cutting, squeeze the switch trigger (1) and depress the
lock-on button (2). Once lock-on button is depressed, release the switch
TOOL-LESS
BLADE CHANGE
COVER
BLADE
ROLLER
GUIDE
Fig. 2 Fig. 2
8