Haussmann 59595029, Руководство оператора

Страница: 24 / 25

24
ENGLISH
OPERATION
Warning! Before you carry out any work on the tool always pull the mains plug
out of the mains socket.
Caution!
Removing and installing a planer blade (20) (see fig.D)
Reversing or replacing a planer blade (20)
Replacing a planer blade
Important information:
Do not release the two Allen keys. They are used to adjust the height of the blade shaft.
Adjustment is necessary only if you wish to use a different planer blade type e.g. a
profiled blade.
Always replace both blades at the same time to avoid out of balance forces.
Replacing the drive belt (see fig. F -G)
NOTE: IF you only release one blade first then you can use the factory-fitted second
blade for orientation when you fit the new blade.
1) Release the 3 bolts of the cutting element (18) using the supplied open end wrench
(26).
Press the removable side guard into the slot in the housing.
2) Push the cutting element (18) sideways out from the blade shaft(17).
3) Push the planer blade (2) sideways out from the cutting element (18).
Note: the blade shaft (17) can also be taken apart, e.g. for cleaning.
4) Reassembly is carried out in the reverse order with a reversed or new planer blade.
The sharp cutting edges of the planer blade (20) present an injury hazard! Never
touch the cutting edges of the planer blade (20).
The planer blade (20) has two cutting edges and it can be fitted either way around.
1) Replace the planer blade (20) when both cutting edges are blunt.
2) Do not re-sharpen the planer blades (20).
1) Release the screws (5) and remove the belt cover (4).
2) Remove the worn drive belt (23).
3) First place the new drive belt (23) onto the small belt wheel (25) and then pull
the drive belt (23) onto the large belt wheel (24) by rotating it.
4) Put the belt cover (4) back into position and fasten it into place with the
screws (5).
Warning! Before you carry out any work on the tool always pull the mains plug out
of the mains socket.