Haussmann 59595029, Руководство оператора

Страница: 22 / 25

22
ENGLISH
TECHNICAL SPECIFICATIONS
OPERATION
WARNING! Before setting up the machine, be sure that the plug is disconnected from the
power supply and that you have a thorough understanding of all safety warnings and
regulations.
ATTENTION! For safety reasons the ON/OFF switch (2) cannot be locked in the
ON position.
Warning! Before you carry out any work on the tool always pull the mains plug out
of the mains socket.
Model PT101008
Voltage 120 V - 60 Hz
Protection class Classe II /
Amperage
6 A
No-load speed 16,000 RPM
Max Depth Cut 0-- 3/32"(2.4 mm)
Max Rabbet Depth 9/16"(15 mm)
Planing width 3-1/4"(82 mm)
Switching on /off:
1) Switching on:
First press the safety lock-out (1)
Then press and keep pressed the ON/OFF switch (2).
2) Switching off:
Release the ON/OFF switch (2)
Adjusting the cutting depth:
The rotary control (13) can be used to set the cutting depth in steps from 0-3/32"
according to the cutting depth scale (14).
Planing debris removal port (right/left selectable):
1)
Release the planing debris removal port (3) by turning it against the direction
of the arrow (out of the “Lock” position).
2)
Pull the planing debris removal port (3) out of the tool.
3)
The planing debris removal port (3) can be set to face left or right in the
planer.
4)
Push the planing debris removal port (3) into the tool.
5)
Lock the planning debris removal port (3) by turning it into the “Lock” position.
Vacuum extraction of dust/debris (see fig. A):