A
OPERATING INSTRUCTIONS
22
3. “Bump Feed” the Trimmer Line
When you need to increase the line length
during use, you can simply “bump feed” the
trimmer line to restore the line to the correct
length. To “bump feed” the trimmer, turn on the
trimmer and gently bump the top surface of
the cutting head on a firm surface. The line will
be automatically extended and be cut to the
correct length (see Fig. I).
OPERATION
Fig J
Fig K
Fig L
Fig M
Fig N
Fig O
Fig P
1. Operating the Trimmer
a) To switch the trimmer ON, press the ON/OFF
trigger switch. To turn the trimmer OFF, release
the trigger (see Fig. J).
b) If the nylon line is too short, follow the
instructions 2 and 3 of the “Preparing Trimmer
for Use” section. Use the trimmer at an angle
of approximately 20º to the working area (see
Fig. K).
Содержание 325602
Страница 27: ...27 ...
Страница 28: ...F CONSIGNES D UTILISATION 28 10 ...