Haussmann Xpert 59595047 Скачать руководство пользователя страница 29

MAINTENANCE

WARRANTY

ENGLISH

28

Always pull the battery charger out of the mains socket and remove the battery 
pack before you clean or maintain the device.
The cordless multi-purpose tool is maintenance-free.
1)   Always keep the tool clean, dry and free of oil or grease.
2)   Clean the tool immediately after you have finished using it.
3)   Do not allow any liquids to enter the tool. Use a cloth to clean the housing.
4)   Never use petrol, solvents or cleaning agents that might attack plastic.
5)   Store the tools, instruction manual and where necessary the accessories in 
      the original packaging. That way you will always have all the information and 
      parts on hand.

Do not dispose of electrical appliances with your domestic waste!

Please discard or recycle your product and its packaging according to your 

municipal bylaws.

 

Thank you for investing in a HAUSSMANN XPERT power tool. These products

have been made to demanding, high-quality standards and are guaranteed for

domestic use against manufacturing faults for a period of 36 months from the date

of purchase.

This guarantee does not affect your statutory rights. In case of any malfunction of

your tool (failure, missing part, etc.), please contact one of our service technicians

at our toll free service line at 1-866-206-0888 from 8 AM to 6 PM, Monday to

Friday, Eastern time. RONA reserves the right to repair or replace the defective

tool, at its discretion.

The product is guaranteed for 36 months if used for normal trade purposes. Any

guarantee is invalid if the product has been overloaded or subject to neglect,

improper use or an attempted repair other than by an authorized agent.

Heavy-duty, daily professional or hire usage are not guaranteed. Due to

continuous product improvement, we reserve the right to change the product

specification without prior notice.

Register your product

We invite you to register your product online to make future communications

easier. To do so, simply visit our website www.haussmanntools.com.

Содержание 59595047






























Отзывы: