21
GB
PROBLEMS AND TROUBLESHOOTING
PROBLEM
SOLUTION
The appliance fails to start / power on.
check the mains connection
empty the water tank
reinstall the water tank properly
The appliance does not condense water
set a lower humidity level
increase the room temperature
change the position of the appliance
check the airflow (inlet and outlet grilles)
clean inlet filters
Low airflow
check the airflow (inlet and outlet grilles)
clean inlet filters
Loud operation
position the appliance vertically (the only permissible position for
operation)
clean inlet filters
E1 or E2 error code on the display
working temperature exceeded – turn the appliance off and wait for it
to cool down, if the error persists, contact an authorised service centre
E3 or E4 error code on the display
permissible humidity level exceeded – turn the appliance off and wait, if
the error persists, contact an authorised service centre
E5 or E6 error code on the display
permissible humidity and temperature level exceeded – turn the
appliance off and wait, if the error persists, contact an authorised service
centre
TECHNICAL SPECIFICATIONS
See the product’s nameplate for technical specifications.
Power cord length:
1.55 m
ATTENTION! MPM agd S.A. reserves its rights to modify the technical data.
PROPER DISPOSAL OF THE PRODUCT
(waste electrical and electronic equipment)
This symbol on the product indicates that the product, after its lifetime, should not be disposed with other
household wastes. To avoid harmful influence on the environment and human health due to uncontrolled
waste disposal, dispose the waste device to the service point of waste household appliances or report
collecting it from home. In order to obtain detailed information about the location and how to dispose
the waste electrical and electronic equipment in a safe way, contact your retailer or local Department
of Environmental Protection. Do not dispose the device with other municipal waste.
Poland
