Hauppauge WinTV-DVB, Инструкция по установке и справочник

Страница: 46 / 62

WinTV-DVB / NEXUS Installation and Reference Manual
40
The front-end is the input section of the WinTV-NEXUS-s card - consisting of
tuner, demodulator, LNB voltage supply control and DiSEqC Signal.
On the tab Status/Tuner and DiSEqC/LNB all settings and adjustments are
made which are necessary for the receipt of a DVB signal.
Filters are used, in order to extract from the DVB signal the information rele-
vant for the DVB Data service. The parameters needed for the use of a DVB
data service (frequency, symbol rate, polarization, PID, IP or MAC address).
Control settings
Selecting the flag key allow you to change the language used in the data
application.
The changes only take effect after clicking on the Apply button. Selecting the
Hide button will make the application move to the task bar. Double clicking
on the smiley symbol around the program window will make the application
appear again.
Reception status
The following symbol enables a permanent check of the reception status of
the tuners.
The upper small box symbolizes the signal quality which will become lower if
the signal degrades. The colour corresponds gradually to (colorless, red,
orange, yellow, lightgreen) with the appropriate display in the bar status /
tuner, which represents the accurate values.
The smiley can display the following statuses:
RED: No DVB signal, front-end is not synchronized, no data reception
DARK GREEN: