Haulotte H28TJ+, Книга по эксплуатации

Страница: 36 / 196

36 2420333140 E06.13 EN
Telescopic machines, 28 - 43 m
C
- Maintenance
Each day and before the beginning of a new work period and on each change of operator, the machine
must be subjected to a visual inspection and a complete functional test. Any repairs required must be
performed before the machine is used, its correct operation depends on it. Inspect the following items :
• State of the structure's parts : Wheel axles, Chassis, Turntable, Boom, jib, platform.
• Absence of cracks, broken parts, damaged paint.
• No distortion in metal components or visible damage.
• Absence of foreign objects at the ends of boom/attachments.
• Presence and check the original position of the platform control box sliding bar.
• Cylinders :
• No leaks : Refer to the Maintenance book.
• No rust and abrasions on the cylinder rod.
• Absence of foreign objects on all surfaces.
• Steering system : Wheels, Driving reducer, Brake and Tyres :
• No cracks, distortions, damaged paint or other faults.
• No missing or loose bolts.
• Condition of the tyres (cuts, excessive wear, etc.)
• State of the rotation systems : Turntable rotation, Turntable rotation selector in platform :
• No excessive clearance : Refer to the Maintenance book.
• No missing or loose bolts.
• Absence of foreign objects on all surfaces.
• Greasing the turntable rotation gear Turntable and Platform.
• Condition of the pulley system :
• No excessive clearance : Refer to the Maintenance book.
• No missing or loose bolts.
• Absence of foreign objects on all surfaces.
• Grease the extension system if necessary.
Increase in periodical inspections : Depending on the condition of certain critical components after 5000
hours, the maintenance staff may have to reduce the interval between periodical inspections and
maintenance. If the decision is made not to replace a part, the part concerned must be recorded in the
inspection schedule.