Haulotte H28TJ+ Скачать руководство пользователя страница 15

Страница: 15 / 196

2420333140 E06.13

Telescopic machines, 28 - 43 m

- Safety precautions

4 - Instructions for intervention

N.B.

-:-Acid is neutralised with sodium bicarbonate and water.

Do not use the machine during while maintenance work is being completed on it.

For any intervention on the power sources, wear glasses and protective clothes (acid spray).

Do not operate the product in the following situations :

• Do not work in an explosive or flammable atmosphere (spark, flame, etc.).

• Do not touch the hot parts of the hydraulic power source (engine, filters, etc.).

• Do not bridge the battery terminals with metallic objects.

• Do not service the battery close to a spark, naked flame, glowing tobacco (emissions of gas).

• Never expose the batteries or electrical components to water (pressure cleaner, rain).

• Never disable the safety devices.

• Do not climb onto the covers.

• Do not fill up the fuel tank, when the engine is running and/or close to a naked (open) flame.

Use an oil collection pan to avoid polluting the environment.

Содержание H28TJ+





































































































































































































Результаты поиска

Содержание H28TJ+

Отзывы:

Похожие инструкции для H28TJ+

Бренды по названию

Популярные бренды

Haulotte H28TJ+, Книга по эксплуатации

Результаты поиска

Содержание H28TJ+

Отзывы:

Похожие инструкции для H28TJ+

Бренды по названию

Популярные бренды