ADJUSTABLE TOW BAR
5,000 LB. CAPACITY
ASSEMBLY AND OPERATING INSTRUCTIONS
WARNING!
IMPORTANT INFORMATION
This Tow Bar’s Hitch Coupler MUST be properly
secured to the hitch ball of the towing vehicle.
After assembly and attachment, pull up and
down on the Hitch Coupler to make sure the
hitch ball is fitting snugly in the Hitch Coupler.
There must be no play between the hitch ball
and Hitch Coupler.
If there is play, tighten the
Adjustment Nut until no play is present. If the
Adjustment Nut is too tight, the Handle will not
lock.
Carefully read and follow the complete
instructions in this manual BEFORE setup
or use.
If the Coupler is not secured properly, the
ball could come loose while the trailer is in
motion, possibly causing property damage,
SERIOUS PERSONAL INJURY, or DEATH.
Please note: Most vehicles will require custom brackets. For front towing of some
vehicles, the vehicle’s bumper will have to be removed first. If not experienced
in setting up this type of equipment and installing brackets, assistance from a
qualified service technician is recommended.
Revised Manual 10b
Visit our website at: http://www.harborfreight.com
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
Copyright
©
2006 by Harbor Freight Tools
®
. All rights reserved. No portion of this manual or any artwork
contained herein may be reproduced in any shape or form without the express written consent of
Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein. Tools required for
assembly and service may not be included.
For technical questions or replacement parts, please call 1-800-444-3353.
94696
