Haug 12.7210.000 Скачать руководство пользователя

Страница: 9 / 12

Maintenace and Repair

Page 9

HAUG

Static Meter

Maintenace and Repair

Except the battery the instrument does not contain any parts which require

maintenance or repair by the user. Any repairs or adjustments neccessary

may only be carried out by

HAUG GmbH & Co. KG

. If a unit is faulty, take it

out of operation and send it to

HAUG GmbH & Co. KG

It is very important not to touch parts of the modulator system. The parts must

be free of foreign materials, such as dust, any spray or similar particles as

well as condensed water. If needed, the modulator system could be cleaned

with alcohol and a dust-free tissue, when switched off. Please avoid any

deformation of rotor!

4.1

Replacement of battery

The 9 V blockbattery has to be replaced when "Low Battery" appears on

screen. Please switch the unit off before opening the battery compartment.

Take out the battery and remove the connector clip. Put the connector clip on

the new battery and put it into the compartment. Close the compartment.

Содержание 12.7210.000













Результаты поиска

Содержание 12.7210.000

Отзывы:

Похожие инструкции для 12.7210.000

Бренды по названию

Популярные бренды

Haug 12.7210.000, Руководство по эксплуатации

Результаты поиска

Содержание 12.7210.000

Отзывы:

Похожие инструкции для 12.7210.000

Бренды по названию

Популярные бренды