Haug 03.5080.000, Руководство по эксплуатации

Страница: 14 / 20

7 Maintenance
14
7.2 Dry cleaning
1. Switch off the ionisation unit and secure it against unintentional
switch-on.
2. Disconnect the ionisation unit from the socket.
3. Brush off the ionisation pins with a suitable brush.
4. Vacuum the ionisation unit or blow off with clean compressed air
(max. 6 bar).
5. Plug the ionisation unit into the wall socket again.
NOTE:
If the result of the dry cleaning is not satisfactory, continue with a
wet cleaning.
7.3 Wet cleaning
1. Switch off the ionisation unit and secure it against unintentional
switch-on.
2. Disconnect the ionisation unit from the socket.
3. Moisten a suitable brush with a suitable cleaning agent. As an
optional, use the RS2 special cleaning system for cleaning.
4. Use a brush to clean the ionisation device.
5. Use compressed air (max. 6 bar) to clean the ionisation unit, and
then let it dry.
6. Plug the ionisation unit into the wall socket again.