Hauber Elektronik HE205 Series, Руководство пользователя

Страница: 18 / 28

HAUBER-Elektronik GmbH
18
15.2 Alarm and limit setting
By pressing the "Save Config" button, the current configuration is displayed by the LEDs around
the HEX switches. For further information, see chapter "Limit values and delay times
” on page
19.
The limit values and delay times are calibrated using the respective HEX switch. As soon as a
switch position is changed, the LEDs around the Hex switch start to blink. The number of
blinking LEDs represents the current position of the HEX switch. To save the configuration,
press and hold down the "Save Config" button for three seconds. Acceptance of the
configuration is signalled by steady lighting up of the LEDs in the selected HEX switch position.
After about five minutes the LEDs turn off automatically.