5
ASSEMBLY INSTRUCTIONS
DD
4. Connect an Upper Arm Pole (D) to a Pole with
Tapered End (B) using the Pole with Tapered End’s
Steel Spring Clip (AA). Repeat step with other Foot
Pole and remaining Upper Arm Pole to complete the
stand body.
4
5. Fit the wide side of one Offset S-Hook (BB) into
the hole at the top of each Upper Arm Pole (D).
A
F
3
3. Connect the wider end of a Pole with Tapered End
(B) to the upward-facing short arm of one Foot Pole
(A) using the Foot Pole’s remaining Steel Spring
Clip (AA). Repeat step with the other Foot Pole and
the remaining Pole with Tapered End.
Hardware Used
BB
Offset S-Hook
x 2
Hardware Used
Steel Spring Clip
(pre-assembled)
x 2
AA
Hardware Used
Steel Spring Clip
(pre-assembled)
x 2
AA
AA
5
B
B
D
AA
D
BB
