Hatteland JH 15T17 MMD Series, Руководство пользователя

Страница: 63 / 128

63
IND100129-127
All specifications are subject to change without prior notice!
Specifications - JH 26T11 MMD-xxx-Axxx (CCFL version)
SPECIFICATIONS
Note: All specifi cations are subject to change without prior notice!
Please visit www.hatteland-display.com for the latest electronic version.
2/2
• High Quality TFT with CCFL Backlight Technology
• Optical Bonding Terchnology
• 25.54 inch viewable image size - Widescreen, Aspect Ratio 16:10
• S-MVA, Active Matrix, Thin Film Transistor (TFT)
• RGB Vertical Stripe
Sync Signal:
• Digital separate synchronisation
• Composite synchronisation
• Synchronisation on green.
• Auto detects VGA -> WUXGA, interlaced and non interlaced
• Video Signal : Analog RGB 0,7Vp-p
: Input Impedance 75 Ohm
Synchronisation Range:
• Horizontal : 15,0 kHz to 91,1 kHz
• Vertical : 60 Hz* to 85 Hz
* Recommended for optimum picture quality
• W:635.00 [25.00''] x H:499.00 [19.65''] x D:101.50 [4.00''] mm [inch]
• Weight: 15 kg (approx)
• Cables = Custom Multifunction Cable to support more signals
• JH 26BRD STD-A1 = Mounting Bracket EN60945 Tested
• JH 26TBR STD-A1 = Mounting Bracket
• JH MMDRO STD-A1 = Rotary Bracket
• JH 26TSV STD-A1 = Sun Visor
• JH 26TAP STD-A1 = Adapter frame for HD 26T21 xxx, Series X)
• JH 26VED STD-A1 = Vesa Bracket
• JH 26TWC STD-A1 = Water Cover
*Please see user manual for drawings/measurements.
• Operating : Temperature -15 deg. C to +55 deg. C
- Humidity up to 95%
• Storage : Temperature -20 deg. C to +60 deg. C
- Humidity up to 95%
• IP Rating : Protection (EN60529): IP66 front - IP20 rear
• Compass Safe Dist. : JH26T11MMD-xxx-xxxx - Std: 125cm Steering: 80cm
Safety Considerations:
Even although the test conditions for bridge units provide for a maximum
operating temperature of 55°C, continuous operation of all electronic
components should, if possible, take place at ambient temperatures of only
25°C. This is a necessary prerequisite for long life and low service costs.
Resolutions:
• VGA : 640 x 480 (including 640 x 350)
• SVGA : 800 x 600 (including 720 x 400)
• XGA : 1024 x 768
• SXGA : 1280 x 1024
• UXGA : 1600 x 1200
• WUXGA : 1920 x 1200*
* Recommended for optimum picture quality. (60 Hz)
Video Signals (with Multifunction Cable):
• Interlaced NTSC and PAL/SECAM video
• Composite video
Power Supply Options:
• 115&230VAC - 50/60Hz - JH 26T11 MMD-Axx-xxxx
• 115&230VAC - 50/60Hz + 24 VDC - JH 26T11 MMD-Mxx-xxxx*
*Multi-power note: You may connect either AC power or DC power or both. In case
both sources are connected, power will be sourced from the AC input. If AC input is
lost, there will be a uninterrupted switch-over to DC input.
Power Consumption:
Operating : 122W (TYP) - 185W (MAX)
On front bezel - Keypad control (IP66) xxx-xxAx models:
• Power On/Off and On Screen Display Menu (push button)
• Brightness Control (up/down - push buttons),
• Hotkeys (left/right - push buttons)
• Mode Status Red/Green/Orange Illuminated LED-Ring Indicator
On front bezel - Potmeter control (IP66) xxx-xxBx models:
• Power On/Off and On Screen Display Menu (push button)
• Brightness Control (rotary control) and Hotkeys (left/right - push buttons)
• Mode Status Red/Green/Orange Illuminated LED-Ring Indicator and
• Speaker / Buzzer
• Color Calibrated models (ECDIS)
• Capacitive Touch Screen / Optical Bonding Technology
• Native Resolution : 1920 x 1200
• Pixel Pitch (RGB) : 0.2865 (H) x 0.2865 (V) mm
• Response Time : 8 ms (typical), "gray" to "gray"
• Contrast Ratio : 1500:1 (typical)
• Light Intensity : 350 cd/m
2
(typical)
• Viewable Angle : +/- 88 deg. (typical) (Up/Down/Left/Right)
• Active Display Area : 550.08 (H) x 343.8 (V) mm
• Max Colors : 16.7 millions
• JH 26T11 MMD-MA1-AOBA = AC/DC, Bonded, Potmeter CBuzzer
• JH 26T11 MMD-AA1-AOAC = AC, Bonded, Capacitive Touch Screen
MMD-xxx-xxBx MMD-xxx-xxAx
Buzzer-Potmeter-Keypad Keypad
For a full overview, please review our typenumber sheet found on our website:
http://www.hatteland-display.com/pdflink/ind100780-1.php
• DVI-I Signal IN : 1 x 29p DVI Female (or as RGB IN with adapter)
• RGB Signal IN : 1 x 15p HD D-SUB (female)
• RGB Signal OUT : 1 x 15p HD D-SUB (female) - Clone of RGB IN**
• Multifunction : 1 x 160p D-SUB (female) - Also see table below
• USB I/O : 1 x TYPE B Conn. (female) Reserved for future use
• AC Power IN : 1 x Std IEC Inlet
• DC Power IN : 1 x 2p D-SUB Connector (male) - Amphenol FCC17
• AC Power OUT : 1 x Std IEC Outlet (5A Max)
** Tested at recommended resolutions. The RGB output signal is at same resolution
and sync as the RGB input. The output is working even if the display unit is turned off,
but power cable/supply must be connected/provided.
TFT Technology:
Synchronisation:
Physical Considerations:
T E S T I N G / A P P R O V A L S & C E R T I F I C A T E S
This product have been tested / type approved by the following classification societies:
IEC 60945 4th (EN 60945:2002) ClassNK - Nippon Kaiji Kyokai GL - Germanischer Lloyd DNV - Det Norske Veritas
ABS - American Bureau of Shipping BV - Bureau Veritas LRS - Lloyd’s Register of Shipping
EU RO MR - Mutual Recognition CCS - China Classification Society
Available Accessories:
Environmental Considerations:
TFT Characteristics:
Supported Signals:
Typical Type Numbers:
Power Specifications:
Signal Terminals:
User Controls:
Factory Options:
Available factory standard cables, 30cm [11.81"] in length.
• VSD100692-1 : 1 x 9P D-SUB (female) - RS-232 (COM1)
• VSD100692-3 : 1 x 9P D-SUB (female) - RS-232 (COM1)
: 1 x 9P D-SUB (female) - RS-232 (COM Touch Screen)
: 3 x BNC (female) (Composite Video in)
• VSD100692-4 : 1 x 9P D-SUB (female) - RS-232 (COM1)
: 3 x BNC (female) (Composite Video in)
Customized cables are possible to support more built-in signals, like: RS-485, RS-422/
RS-485, Buzzer, ON/OFF, Touch (PS/2), 1 x S-Video IN, Remote External User Controls,
Alternative Keypad interface (i2c) and reserved for other signals. Custom cable lengths
can be manufactured.
Multifunction Cable: