Hatteland JH 10T06 MMD, Руководство пользователя

Страница: 74 / 84

7
Serial Communication (SCOM) Interface
Communication Interface
IND100084-1
INB100005-1 (Rev 19)
Communication settings #2 (after Jan 2005)
The communication options are set by switches, placed at the backside of the display. These
switches are protected behind a hatch mounted with four screws. Unscrew those, and remove the
hatch. The communication settings are placed like seen on the illustration below. For adjustments,
a thin object is required for reaching the switches.
[ Note: JHSCOM placement for products released and introduced AFTER Jan 2005]
Communication mode Duplex
Straight/Reverse
Rx/Tx for RS422, COM1
Address
Protection Hatch
NOTE: By factory default the comport is set to RS232 mode, unless customer specified.