Hatteland HT C02HI STC series, Руководство пользователя

Страница: 96 / 102

96
Signal Output Combinations
Appendix
IND100077-152
Signal Output Combinations
Overview of tested signal outputs
The latest computers from Hatteland Display are capable of displaying 3 signals simultaneously via DVI-D, DVI-I or
RGB/VGA (via adapter) or through the DisplayPort (DP) (including DP to DVI adapter) connectors. Below, the list of
possible combinations the hardware support. All resolutions and frequencies are indicated as max. Everything lower
than max can be used, even as low as 640x480 (VGA) for all 3 signal outputs.
Example illustrations, indicating DVI and DP connectors:
DVI-D Output
DVI-I Output DP Output
DVI-D Output
DVI-I Output DP Output
DVI-I DVI-I to VGA DVI-D DP DP to DVI Outputs
1920 x 1200 @ 60Hz 1
1920 x 1200 @ 60Hz 1
1920 x 1200 @ 60Hz 1920 x 1200 @ 60Hz 2
1920 x 1200 @ 60Hz 1920 x 1200 @ 60Hz
1920 x 1200 @ 60Hz
*
3
1920 x 1200 @ 60Hz 1920 x 1200 @ 60Hz 2
1920 x 1200 @ 60Hz 1920 x 1200 @ 60Hz 2
2560 x 1600 @ 60Hz 1
1920 x 1200 @ 60Hz 1920 x 1200 @ 60Hz 2560 x 1600 @ 60Hz 3
1920 x 1200 @ 60Hz 2560 x 1600 @ 60Hz 2
1920 x 1200 @ 60Hz 2560 x 1600 @ 60Hz 2
1920 x 1200 @ 60Hz 2560 x 1600 @ 60Hz 2
1920 x 1200 @ 60Hz 1920 x 1200 @ 60Hz 2560 x 1600 @ 60Hz 3
1920 x 1200 @ 60Hz 1920 x 1200 @ 60Hz 1920 x 1200 @ 60Hz 3
1920 x 1200 @ 60Hz 1920 x 1200 @ 60Hz 1920 x 1200 @ 60Hz 3
3840 x 2160 (4K UHD, DisplayPort) @ 30Hz and 60Hz pending in table above.
* Active DP to DVI adapter must be used to support setup with three DVI-D displays. Chipset provides max two
simultaneous DVI-digital outputs, the third signal must then be analogue or DP. “Passive adapter” would use one of
the available DVI-digital signals, while “Active adapter” will convert the DP signal to DVI-D.