Hatteland HT B07CD STD, Руководство пользователя

Страница: 14 / 40

14
INB100032-1 (Rev 14)
IND100133-25
Reset Button: (Hard Reset)
To reset the computer in case of severe software failure, press this button (it is mounted behind
the edge of the casing, to access it use a screwdriver or a pen), This reset button is a hard reset
which means the operating system will NOT be warned. Using this reset method may damage files
and / or operating system in worst case scenarios. Precaution should be taken when using this.
To perform a safe software reset, press either the power button, or use the operating system own
reset functionality if possible.
Power Button & Power LED:
To turn ON the computer, press down button and release it immediately. The power indication
(LED) will turn green and any operating system will automatically boot. To turn OFF the computer,
press down this button and hold it for 3 seconds. The operating system may require additionally
tasks to be performed before computer shuts down and turns off the unit.
Hard Disk LED (HDD LED):
The hard disk indication (LED) will turn orange when there occur read / write activity to / from the
hard disk.
Internal Disk Device:
The B07 unit can use 1 x SDD 2.5” or 2 x uDOC (4GB+) storage device as the main data
storage (hard drive). The operating system and all other files will be placed on this, normally visible
as drive C: This device is normally factory installed option. The storage device are mounted inside
the unit and are not visible/accessible externally.
Front / internal area of computer
Reset Button Power Button HDD LED Power LED
Physical Overview - HT B07CD STD
Internal Disk Device