Hasselblad H4D 40, Руководство пользователя

Страница: 45 / 134

45
H4D
1 2
3
1 2
3 4
To use a profi le from the main screen, press the
PROFILES
but-
ton to reach the profi les screen again. Scroll down the list to the
profi le you want and then press the Load ( AF ) button. All the
saved settings will then be automatically implemented.

If you decided to change the settings but nevertheless keep
the Profi le name on the list, the new set of parameters will be
retained under that name. That is to say, the settings will not
be the same as listed here, despite the name. It might be safer
practice to always change the profi le name to avoid later con-
fusion.
Using profi les
1) From the main screen, click PROFILES ( ON.OFF button) on
the grip and the profi le screen will appear.
2) Use the scroll bar to go through the list and highlight the
desired profi le.
3) Press
Load
(
AF
button). The camera is now set according to
all the parameters stored according to the name.
Changing a profi le name
You can change a profi le name (except ‘Standard’) at any time.
Proceed as follows:
1) From the main screen, click PROFILES ( ON.OFF button) on
the grip and the profi le screen will appear.
2) Use the scroll bar to go through the list and highlight the
desired profi le.
3) Press
Load
(
AF
button).
4) Click PROFILES ( ON.OFF button) again.
5) Press Save (ISO/WB button) The Profi le name screen is then
displayed where you can rename the profi le to what suits you
(see section Image Info 4.2 further on in this manual for pro-
cedure details).
ON
•
OFF
PROFILES/ESC
ON
•
OFF
PROFILES/ESC
5
ISO / WB
Save
To quickly reset all profi les back to
the original factory settings:
1. Remove battery.
2. Wait 5
–
10 seconds.
3. Replace the battery while keep-
ing both the Menu and IS0/WB
buttons pressed.
MENU
ISO/WB
ON
•
OFF
PROFILES/ESC
N o t e
AF
Load
AF
Load