Hasselblad H4D 40, Руководство пользователя

Страница: 12 / 134

12
H4D
Typical camera grip display when
changing settings.
Command indication
The upper row on the screens describes commands (which
change according to the setting). The button immediately
above each command eff ects the change. So in this case, for
example, you would press the FLASH button to ‘exit’ from
the screen. See note below.
Settings symbols
Symbolize the options available when settings are changed.
The active symbol is depicted by a drop shadow.
Control wheel description and direction
Arrowheads symbolize which control wheel should be used
to change the setting they are beside. In this case, the Brack-
eting option is chosen by the front control wheel and the
number of captures in that option is chosen by the rear con-
trol wheel.
. . .
= front control wheel
= rear control wheel
Setting information
The lower row on the screen displays information about the
current state of the setting. In short, the upper row displays
what you can do, and the lower row displays the current
state of settings or what you have done.
Typical camera grip display (
the information in brackets describes this particular example only
).
Grip display − overview
Focus setting
(Autofocus setting, single
shot mode)
Drive condition
(Single setting)
Shutter speed setting
(1/400s)
ISO setting
(100 ISO/ASA)
Low battery symbol
Capture counter
(1286 shots remaining on
chosen storage medium)
Metering method
indication
(Centre weighted)
White balance
(Daylight)
Flash condition indication
(No exposure compensation,
normal fl ash synchronisation)
Aperture setting
(f/5.6)
Exposure mode indication
(Aperture priority setting)
Exposure Value display
(EV 9.3)