66
User Manual Version 3.1
Cartridges
This test checks the electronically connections between cartridge mountings and printheads.
The results of the test are shown in the display.
Test Note
HP PEN ID
The identification code of each PEN board (e. g
13
=
Unit
U1
, Cartridge
C3
).
MISSING DOTS
Number of missing dots of the cartridges, that can’t
be controlled by the printer.
If all nozzles response correctly, the display will show
“
no
”.
Amount of missing dots
The amount of missing dots (
MISSING DOTS
) can be an evidence, that
the connection between printhead and cartridge mounting is
interfered.
If the amount of missing dots is a multiple of seven (14, 21, 28, ...),
the problem lies most likely in a draggled printhead contacting.
In this case, clean the contacts of the printhead and that of the
cartridge mounting with a piece of cloth, an repeat the test.
Pos: 60.86 /Bedienungsanleitungen/Geräte spezifisch/Drucker/Menüpunkte Drucker/Ü3/Ü4/Ü3_3235_Prewarming @ 1\mod_1255684370577_912.doc @ 6659 @
Prewarming
The
Prewarming
function of the printer will be checked in this test. Afterwards the printer
should display the “
PREWARMING:o Data/s
” status.
Pos: 60.87 /Bedienungsanleitungen/Geräte spezifisch/Drucker/Menüpunkte Drucker/Ü3/Ü4/Ü3_3236_PEN Board @ 1\mod_1255684373658_912.doc @ 6663 @
PEN Board
This test will check the circuit (PEN) boards that are integrated in the print units. The test
will be performed with all circuit boards of the printer.
Authorised service personal can use the values of this test for service purposes.
Test Note
AMB.TEMP
The measured temperature close to the printhead
nozzles in degree Celsius °C
REF.RES[h]
“Reference Resistor” – reference value
TSR [Hex]
„Thermal Sense Resistor“ - resistance value inside the
printhead
Pos: 60.88 /Bedienungsanleitungen/Geräte spezifisch/Drucker/Menüpunkte Drucker/Ü3/Ü4/Ü3_3241_LED/ Beeper @ 0\mod_1254916802136_912.doc @ 5103 @
