User Manual Version 3.1
31
Figure 12: Position of the slide
Pos: 51 /Bedienungsanleitungen/Geräte spezifisch/Drucker/AS-830/5.4_Ü2_Adjusting Printer to the material thickness_AS-830/930 @ 2\mod_1268645618968_912.doc @ 13413 @ 2
5.4
How to adjust the printer to the material thickness
To ensure a sharp and clean print quality and a safe material transport, you have to adjust
the distance from the print unit to the material.
•
Open the wing screw (see Figure 13).
•
Turn the thickness adjustment screw to the appropriate value.
For material up to 0.3 mm thickness you can use the lowest position.
•
Tighten the wing screw again.
