ASSOCIATIONS
Associations provide direct control of other
devices within the Z-Wave network, using the
switches, connected to the module inputs.
ASSOCIATION GROUPS:
Association Group 1
(
Lifeline)
Reports state of the device.
The main Z-Wave+ network controller is added to
this group by default. It is not recommended to
modify this group.
Association Groups 2 to 11
(User Groups 1 to
10) are assigned to switches S1 to S10.
The module sends BASIC command class frame
(On/Off), following the state of the corresponding
Output 1 to Output 10 (behavior depends on the
value of the configuration parameter for the
Button Input type (parameter 65 to 73, individual
for each channel).
Association ensures direct transfer of
control commands between devices, i.e.
it is performed without participation of
the
main
controller
and
requires
associated device to be in a direct range.
Sample configuration screens and module views in
Z-Way UI.
Sample configuration screens and module views
in Fibaro Home Center UI:
Configuring of polling time interval :
Sample views of RS10-PM power data in Fibaro
Home Center Energy Panels – (Current Energy
and Historical Data):
