HASEL ÜTÜ SAN.TİC.LTD.ŞTİ.
11
MOUNTING INSTRUCTIONS
1.
1.
If the product is three phase
: Prepare a panel near to
machine on the wall with 25A an automatic fuse, and
earthed socket suitable for 400 V AC-50 Hz.
If the product is single phase:
Prepare a panel near to
machine on the wall with 25A a fuse, and earthed socket
suitable for 230 V AC-50 Hz.
Let a qualified electrician prepare the electric connections of the
Machine. Your cable connection must be as it’s written in the
mounting instruction. Your machine can get trouble by low or high
voltage, and this situation is not in guarantee. You can obviate the
low or high voltage by using an automatic voltage regulator.
2.
Water discharge valve (
17
) will be connected to the
canalization installation by the hose which can resist 100°C
3.
Connect the power cable (
23)
to
socket. Do not forget to earth
the machine. Otherwise the manufacturer is not responsible for
any damage or injury occurred by lack of grounding
.
4.
Mount the end of the iron hose to nipple of solenoid valve (
14
),
mount the other end of iron hose to nipple of hand iron with hose
clamps.
5.
Put the hand iron’s plugs to socket (
22)
. If hand iron doesn’t
work; reverse plug than put to socket again