HASE Kano, Инструкция по эксплуатации

Страница: 36 / 48

36
5. Operating the Revolving Console
The Kano has a maximum rotational angle of 90 de-
grees; you can adjust the rotational angle in 15-de-
gree increments.
Unlock the rotary console by briefl y pressing the
button A and then turn the Kano to the desired po-
sition. Shortly before the fi nal position is reached,
press the key A again and lock the stove into place
with a slight rotational movement.
A
fi g. 3
WARNING!
Never turn stove when lighting fi re!
In the whole rotational area range, the
safe distances (radiation area) apply to
distances to fl ammable materials.
6 . Initial Operation
NOTE!
During shipment, condensation moisture
can accumulate in the stove’s interior,
which may possibly lead to the appearance
of condensation or water on the stove or
fl ue pipes. Please dry off these damp areas
immediately.
The surface of your stove was treated in a sandbla-
sting machine before applying the colour coating.
Despite careful and thorough inspection, there may
still be some residual material in the stove body,
which can fall out when your stove is being instal-
led.
NOTE!
To prevent any damage, please immediate-
ly vacuum up these small steel pellets with
a vacuum cleaner.
The fi rst time a stove is operated, the heat develop-
ment causes the emission of volatile components
from the coating, sealing strips and lubricants, and
smoke and odours can occur.
At a higher combustion temperature, this one-time
process can take between 4 to 5 hours.
To achieve this higher combustion temperature,
please increase the fuel quantity recommended
in Section 8, „Adding Fuel/ Heating with Nominal
Thermal Output“, by approximately 25%.
2. Vorbereitung zur Montage
2.5 Drehwinkel am Aufstellort einstellen
fi g. 4
2. Vorbereitung zur Montage
2.5 Drehwinkel am Aufstellort einstellen
fi g. 5