6
5
IMPORTANT: BATTERY INFORMATION
CAUTION:
1. TO AVOID BATTERY LEAKAGE
2. Should this product cause, or be affected by, local electrical
interference, move it away from other electrical equipment.
Reset (switching off and back on again or removing and
re-inserting batteries) if necessary.
a. Always follow the instructions carefully. Use only batteries
specified and be sure to insert them correctly by matching
the + and – polarity markings.
b. Do not mix old batteries and new batteries or standard
(carbon-zinc) with alkaline batteries.
c. Remove exhausted or dead batteries from the product.
d. Remove batteries if product is not to be played with for a
long time.
e. Do not short-circuit the supply terminals.
f. RECHARGEABLE BATTERIES: Do not mix these with any other
types of batteries. Always remove from the product before
recharging. Recharge batteries under adult supervision.
DO NOT RECHARGE OTHER TYPES OF BATTERIES.
To Replace Batteries
Troubleshooting
Feeding Your Pony
Posing Your Pony
• If your BABY BUTTERSCOTCH pony is turned ON
but doesn’t respond to your touch or sound, she might
be taking a “nap.” Just press her back to “wake” her up.
• If your BABY BUTTERSCOTCH pony doesn’t whinny
or snort when you talk to her, try speaking in a louder
voice. You might also need to press the button on her
back once to encourage her to “talk.”
• If your BABY BUTTERSCOTCH pony still doesn’t
function properly, restart her by moving the ON/OFF/
TRY ME switch to the OFF position for a few seconds,
then back to the
ON
position and press the button on
her back. If she doesn’t move or make sounds after that,
it may be time to change the batteries.
When you give your pony her carrot, she will
move her mouth to chew and make crunching sounds.
Phillips/cross head screwdriver (not included)
needed to replace batteries.
Posing your BABY BUTTERSCOTCH
pony is easy! Just move her hind legs
forward and keep her front legs standing
for a sitting pose;
or
move her front and
hind legs forward to have her lie down.
1. Locate battery compartment on your
pony’s tummy.
2. Loosen screw on battery door.
3. Remove and discard old batteries.
4. Replace with fresh 4 x 1.5V C size alkaline
batteries.
5. Replace door and tighten screw.
NOTE:
When not in use, slide the ON/OFF/
TRY ME switch to
OFF
to conserve battery life.
NOTE:
Never give real food to your pony.
NOTE:
Do not
move your pony’s front
or hind legs backward.
12k0209-4_521940000_FRF_pony_Baby_Cap Sensor.indd 8-9
2/13/12 10:12 AM
