3
4
Meow!
About 45 seconds without activity, or holding back sensor for about
3 seconds, will make kitty go into
SLEEP MODE
.
Press her back or squeeze front right paw to wake her up.
NOTE:
Light sensor will not respond in sleep mode.
TROUBLESHOOTING
Slide switch to OFF when not using toy to conserve battery power.
Be sure nothing is pressing down on any sensors. For best performance,
use on hard, level surface away from direct sunlight. If toy is not
functioning well, move switch to OFF for a few seconds then back to ON
and press her back or front right paw. If that doesn’t work, change the
batteries. Press her back or right front paw to change action. She cannot
be interrupted in cuddle mode. Lots of active play will make it take longer
for her to go to sleep.
TO PLAY
GB
Make sure your pet doesn’t get wet! Gently brush
its fur with a cloth or soft brush to loosen any dirt.
You can use a slightly damp cloth to remove stains,
but don’t use any cleaners.
SENSORS
1. Light
2. Press
3. Squeeze
GROOMING
Wave kitty’s toy or your hand near her
forehead.
To make kitty jump up, pounce,
wiggle her paws or make kitty sounds.
NOTE:
Make sure you’re close
to her so she can sense you’re
there.
Press her back.
Squeeze her right front paw.
Squeeze paw twice and she’ll sing.
To stop singing, wait about 6 seconds,
squeeze paw again or press her back.
Press her back twice for
CUDDLE MODE
.
To stop cuddle mode, squeeze her front right paw
or stop pressing her back for about 8 seconds.
Slide switch to ON.
527
219
527
Customer Code: 5008/A2003E350_FRR_DaisyKitty_INST.indd
2013-03-0156/Cass/2013-03-08/EP1_CT-Coated
219
